Audible Alarm Thermometer with Min / Max Display
Min/Max memory feature permits monitoring of conditions for any time period. The unit reads ambient or probe temperature. Alarm sounds when the temperature rises above or falls below programmable set points. The alarm will sound for 1 minute and issue a 3-second repeater beep every minute thereafter, for up to 12 hours. The alarm will continue to sound even if the current temperature display returns to an "in range" condition. Preferred by JCAHO for monitoring medication temperature.
Supplied with flip-open stand for lab bench, slot for wall mounting, and velcro to attach to any surface. Easy-view, 0.5" high display may be read from ten feet away. Wire mounting bracket permits easy probe placement. Sensor and ten-foot cable perform accurately even when both are underwater. Includes a AA battery for continuous use (battery life is approx. 1 year). Case constructed of high-impact, chemical-resistant ABS plastic.| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -58°F ~ 158°F (-50°C ~ 70°C) |
| Temperature Accuracy: | +/- 3°F (+/- 1.5°C) typical |
| Temperature Resolution: | 0.1° |
| Temperature Scale: | °F and °C |
| Sensor Dimensions: | 3/16" Dia x 1" |
| Min/Max Memory: | Yes |
| Dimensions: | 2.75"W x 4.25"H x 0.75"D |
| Weight: | .25 |
| Power: | AA Battery ( Included ) |
| Number of Sensors: | One |
- Alarm Thermometer
- 10 Ft. Sensor
- (2) AA Batteries
- Instructions
- Expert Technical Support
- NIST Certificate
SETTING THE HI/LO ALARM
1. Press the MODE button until unit is in the ALARM DISPLAY MODE indicated by the display of current temperature and HI and LO alarm settings.
2. To set the HIGH temperature alarm limit press the HI button, to advance the display in 1° increments, until the desired high temperature is displayed. Press and hold the HI button to rapidly advance the display in 5° increments.
3. To set the LOW temperature alarm limit press the LO button, to advance the display in 1° increments, until the desired low temperature is displayed. Press and hold the LO button to rapidly advance the display in 5° increments.
The unit will sound the alarm in both MIN/MAX DISPLAY MODE and ALARM (HI/LO) DISPLAY MODE. Slide the ALARM ON/OFF switch to ON. When the current temperature display rises above the HI set point, or falls below the LO set point, the alarm will sound for 1 minute and issue a 3 second repeater beep every minute thereafter, for up to 12 hours. The alarm will continue to sound even if the current temperature display returns to an “in range” condition. To temporarily silence the alarm press either the HI or LO button the back of the unit. The unit is still active and the alarm will sound again if the temperature goes out of range. To permanently silence the alarm slide the ALARM ON/OFF switch to OFF position.
1. Press the MODE button until unit is in the ALARM DISPLAY MODE indicated by the display of current temperature and HI and LO alarm settings.
2. To set the HIGH temperature alarm limit press the HI button, to advance the display in 1° increments, until the desired high temperature is displayed. Press and hold the HI button to rapidly advance the display in 5° increments.
3. To set the LOW temperature alarm limit press the LO button, to advance the display in 1° increments, until the desired low temperature is displayed. Press and hold the LO button to rapidly advance the display in 5° increments.
The unit will sound the alarm in both MIN/MAX DISPLAY MODE and ALARM (HI/LO) DISPLAY MODE. Slide the ALARM ON/OFF switch to ON. When the current temperature display rises above the HI set point, or falls below the LO set point, the alarm will sound for 1 minute and issue a 3 second repeater beep every minute thereafter, for up to 12 hours. The alarm will continue to sound even if the current temperature display returns to an “in range” condition. To temporarily silence the alarm press either the HI or LO button the back of the unit. The unit is still active and the alarm will sound again if the temperature goes out of range. To permanently silence the alarm slide the ALARM ON/OFF switch to OFF position.