Comark Most Popular PDT300 Thermometer
The CMKSEN053 Waterproof Pocket Digital Thermometer with 1.5mm Thin Tip Probe is an ideal pen-style digital cooking thermometer that is slim and fits flat in your pocket.
Type of Sensor: | Thermistor |
Temperature Sensing Range: | -58°F ~ 300°F ( -50°C ~ 150°C ) |
Temperature Accuracy: | +/- 2°F (+/- 1°C) typical |
Temperature Resolution: | 0.1° |
Temperature Scale: | °F and °C |
Min/Max Memory: | Yes |
Calibration Available: | Field Calibratable |
Power: | 1.5V Silver Oxide Button Cell Battery |
Battery Life: | Auto Power Off |
Special Notes: | Also Available in Purple for |
Display: | LCD |
Sheath Material: | Stainless Steel |
- PDT300 Pen Style Thermometer
- 1.5V Silver Oxide Button Cell Battery
- Instructions
- Expert Technical Support
- CMKSEN053 Technical Data Sheet (PDT300)
- Food Safety Brochure
- 5 Year Warranty and NSF Approved
- °F/°C switchable
- Overall length: 5.75"
- Stem/Probe length: 3"
- Sampling Time: 1.5 seconds
- Battery: 1.5V
- Accuracy: ±1°F ±0.5°C
- Auto Power Off
- Water resistant thermometer
- Membrane keypads
- Fits flat in pocket
- Withstands constant use in wet or humid conditions
- Tapered tip probe for faster response
- Data hold function to freeze a reading
Press the «ON/OFF» button to start or stop operation. The unit will automatically power off after 35 minutes. Low Battery is indicated by «LOB» blinking alternately with a reading.
Change from C° to F°: With the unit “off” hold the «ON/OFF» button and the display will alternate between °F and °C. Release the «ON/OFF» button when the desired mode is displayed.
Data Hold: To hold a displayed reading, press the «D-H» (data hold) button. The reading will flash when the D-H is in operation. Press the «D-H» button again to return to normal operation.
Battery Removal: Use a screwdriver blade or coin to turn the battery cover counter clockwise for removal. Replace the TIPACC300 (1.5V LR44) battery and turn the cover clockwise until tight.