Easy-to-operate unit features a DATA HOLD switch allowing readings to be captured and noted. Unit is self-contained with built-in humidity and temperature sensors, °F/°C switchable. Response times vary from 30 seconds to 3½ minutes.
Temperature Range
32 ~ 122°F / 0. ~ 50°C
Temperature Accuracy
+/- 3°F (+/- 1.5°C) typical
Temperature Resolution
0.1°
Temperature Scale
Max Temp
Type of Sensor
Thermistor / Humidity
Sensor Wire Length
Sensor Type
Sensor Style
Sensor Dimensions
Probe Length
Sheath Diameter
Sheath Length
Sheath Material
Wire Gauge
Wire Length
Wire Material
Special Limits
Stripped Leads Length
Transition Diameter
Transition Length
Plug Size
Jack Size
Time Constant
Response Time
Number of Measuring Points
Number of Events
Color Change
Number of Sensors
Data Points
Min/ Max Memory
No
Recording Rate
Sampling Rate
Transmission Rate
Exportable Data
Yes
Software Required
Software Type
Network Connectivity
RS-232
WiFi Network
Dimensions
2-3/4"x8"x1-1/2"
Weight
8 Oz.
Calibration Available
Yes (included)
Display
LCD
Display Dimensions
½" Digit Size
Power
9V Battery
Battery Life
Supplied with 9-volt alkaline battery for 6 months of intermittent readings or 100 continuous hours
If this meter does not function properly for any reason, replace the battery with a new, high-quality battery (see the “Battery Replacement” section). Low battery power can occasionally cause an number of “apparent” operational dif culties. Replacing the battery with a new fresh battery will solve most difficulties.
RECORD MODE (Min/Max Memories)
While in the Record Mode, the maximum and minimum readings for Humidity or Dew Point (depending on the display mode) will be recorded. Also, while in the Record Mode, the Automatic Shutoff feature is disabled so that long term monitoring may be performed.
Supplied with 9-volt alkaline battery for 6 months of intermittent readings or 100 continuous hours and Traceable®
Certificate. High-impact ABS plastic
8 a.m. to 7 p.m. EST 1-800-TIP-TEMP or use our Contact Form 
