Temperature & Humidity Meter
Easy-to-operate unit features a DATA HOLD switch allowing readings to be captured and noted. Unit is self-contained with built-in humidity and temperature sensors, °F/°C switchable. Response times vary from 30 seconds to 3½ minutes.
| Type of Sensor: | Thermistor / Humidity |
| Temperature Sensing Range: | 32 ~ 122°F / 0. ~ 50°C |
| Temperature Accuracy: | +/- 3°F (+/- 1.5°C) typical |
| Temperature Resolution: | 0.1° |
| Humidity Range: | 10.00 to 95.00% RH |
| Humidity Accuracy: | ±1.5% |
| Humidity Resolution: | 1% |
| Min/Max Memory: | No |
| Dimensions: | 2-3/4"x8"x1-1/2" |
| Weight: | 8 Oz. |
| Calibration Available: | Yes (included) |
| Power: | 9V Battery |
| Battery Life: | Supplied with 9-volt alkaline battery for 6 months of intermittent readings or 100 continuous hours |
| Battery Backup: | No |
| Exportable Data: | Yes |
| Display: | LCD |
| Network Connectivity: | RS-232 |
| Display Dimensions: | ½" Digit Size |
Supplied with 9-volt alkaline battery for 6 months of intermittent readings or 100 continuous hours and Traceable® Certificate. High-impact ABS plastic
If this meter does not function properly for any reason, replace the battery with a new, high-quality battery (see the “Battery Replacement” section). Low battery power can occasionally cause an number of “apparent” operational dif culties. Replacing the battery with a new fresh battery will solve most difficulties.
RECORD MODE (Min/Max Memories)
While in the Record Mode, the maximum and minimum readings for Humidity or Dew Point (depending on the display mode) will be recorded. Also, while in the Record Mode, the Automatic Shutoff feature is disabled so that long term monitoring may be performed.