1. Peel the adhesive liner from the back of the TiltWatch Plus while holding it in an upright position. Once the adhesive liner is removed, the TiltWatch Plus is armed. Apply the TiltWatch Plus to an oil-free surface in an environment above 10°C / 50°F for best results.
2. Place the TiltWatch XTR in an upright position near the lower corner of the shipping container. Mounting as low as possible provides the best response.
3. Press the TiltWatch Plus firmly in the center and around the edges to ensure doting adhesion to the container to which it is being applied.
Tip: Rough wood and heavily waxed wood containers may require special attention. If the wood is extremely rough, we recommend the use of a spray adhesive to increase bonding strength.
Activation Angle: 10° increments from 30° axis +/-5°
Monitoring Range: Single Plane and Rollover
Adhesive: 1 mil High Tack Acrylic
Humidity Tolerance: 5% to 99% Non-condensing
Temperature Tolerance: -40F to 140F
Composition: Clear PTE housing and plastic indicator