This standalone data logger can record events (detecting an input and storing the time and date), record state changes (similar to an ˜event™ but also recording when the input reverts back to normal) and count events (count the number of events that happen during a timed interval). Up to 32,510 events or state changes can be recorded and up to 32,510 timed intervals in event counter mode (with 65,536 events in each interval). Events and state changes can be triggered by either a rising edge (a voltage going from low to high) or falling edge (a voltage going from high to low). It is also possible to use volt free contacts. Instead of measuring an external voltage, the data logger applies a voltage across the screw terminals and detects when the input closes (i.e. a relay or microswitch). Fast logging rates allow event capturing at speeds of up to two times per second and state changes at speeds of up to four times per second.
Event counting can operate at speeds of up to 100 times per second (when the LEDs are turned off). The user can easily set up the logger, and download the stored data by plugging the data logger into a PC™s USB port and running the purpose designed software under Windows 2000, XP, Vista & 7. Data can then be graphed, printed and exported to other applications.
The data logger is supplied complete with software, measurement leads terminated with crocodile clips and a long-life lithium battery which allows logging for up to 1 year. Functionality of the unit is indicated by flashing red and green LEDs, with an option to flash the red LED every time an event occurs.
Temperature Sensing Range
Operating Temperature Range
Type of Sensor
Sensor Wire Length
Stripped Leads Length
Number of Measuring Points
Number of Events
Number of Sensors
Min/ Max Memory
Functions as an event logger, state change logger and event counter
Logging rate of up to four times per second for events, two times per second for state changes and 100 times per second when counting
Stores up to 32,510 readings in event mode
Stores up to 32,510 readings in state change mode
Stores up to 32,510 timed intervals in event counter mode
Accepts input voltages of up to 24V
Volt free contacts option (normally open contact only)
Rising and falling edge triggering
LED flash on event / state change
Connection via two screw terminals
USB Interface for set-up and data download
Supplied with replaceable internal lithium battery, Windows control software and measurement leads