HotSpot PLUS Capacitive Discharge Welder

(0)No Reviews yet
QuantityPrice
SKU: DCCHEA006P01
Provided: Each
Thermocouple & Strain Gauge Welder
220Vac/50Hz
Special Order: Terms & Conditions Apply.

Out of Stock

Notable Features

The HotSpot PLUS is the newest member of the HotSpot Capacitive Discharge welder family. It broadens the power range of the HotSpot series and offers several fixturing and welding attachments to facilitate simple spot welding, stud welding, and pin welding modes. In addition, the HotSpot PLUS provides standard thermocouple welding functions. The HotSpot PLUS is designed to handle the attachment of heavy wires, light gauge studs and weldable pins to metal surfaces. It can also close larger tubes than the HotSpot II unit and aid in wire harness strapping and insulation blanket installation. Its controllable weld energy capability matches the needs of strain gauge attachment applications. The principal difference between the HotSpot PLUS and the HotSpot II is its heavier wire welding capability along with optional attachments for spot welding and stud welding. The HotSpot PLUS can handle wire pairs as heavy as #12 gauge. It can also close larger tubes than the standard unit and can do stud welding as an aid in wire harness attachment and in insulation blanket installation.The HotSpot PLUS operates only from AC power. A battery-powered version of the unit is not offered. Its less than #18 weight and compact design make it a very portable package.
  • Part Number DCCHEA006
  • Size: 3.5" High 8.5" Deep 11.5" Wide (less handle)
  • Weight: 18 Pounds
  • Stored Weld Energy: 5 to 525 Watt seconds
  • Weld Capability: Welds up to #10 studs #10 pins and #12 gauge wire pairs
  • Cycle Time: Charging time at maximum energy setting is less than 10 seconds
  • Controls: Provides energy adjustment control 2 position energy range switch on/off ac power switch and LED Displays to indicate charging and energy storage status
  • Power: Uses 220 VAC 50 Hz line power Circuit protected by 1.5 Amp line breaker
  • Hot Spot Plus Welder (220Vac/50Hz)
  • Eye Shielding Protective Goggles
  • Carbon Block
  • Grounding Magnet
  • Instruction Booklet.
  • Expert Technical Support
  • Note: Not all items shown in main picture are included. Please call to discuss your intended use.
Quick Action
The HotSpot PLUS is light and portable so you can move it right to where you need to make welds, fixture hardware, and attach thermocouples. The actual welding time is a fraction of a second and the short recycle interval, even at full power, will allow you to make 6 or more welds a minute, even quicker for ordinary gauge thermocouples.

Easy-To-Use
Anyone can quickly become proficient in the use of the HotSpot PLUS. While sophisticated internally, the HotSpot PLUS provides the operator with a firing button and simple on/off and energy level adjustment. The dual capability of pin and thermocouple welding makes the HotSpot PLUS particularly attractive for applications currently employing stud welders and thermocouple attachment units.

Flexible
The HotSpot PLUS welder is a dual range high-energy unit that has the versatility to provide fine control as well as the high power capability needed for heavier welds. Front panel indicators and controls allow the operator to easily monitor the status, set the energy level, and initiate a weld cycle. A remote firing switch is also provided on the attachment handle.

The HotSpot PLUS operates only from AC power. A battery-powered version of the unit is not offered but it can be driven by a low power battery to AC converter. It weighs only 18 lbs. and it;s compact design makes it a very portable package.


 
 Attaching thermocouple to pipe. Pin welding attachment Pin welding attachment pens Spot welding attachment Stud welding attachment

Ratings & Reviews

No reviews available

Be the first to Write a Review