Hi-Lo Adjustable Temp Alarm Light, AC Powered
Designed for locations which may be vacant or for a periodically unoccupied from time to time. Featuring solid state technology with low-power consumption, utilizing Bi-Metal Coil and LEDs for the flash signal. This red flashing signal will alert a watch person that a rising and/or falling temperature condition. Your watch person should immediately take corrective action when the flashing light is visiable.
The advantage is that this warning signal is powered with the AC Power Supply.
This warning light has adjustable set-points that can be set from -34°F to 130°F with a 20 foot extension cord connected to the light. This enables the thermostat to be positioned out of direct sunlight or drafts that may not indicated true room temperatures.
|Type of Sensor:||Bi-Metalic Sensor|
|Temperature Sensing Range:||0°F ~ 120°F (-15°C ~ 45°C)|
|Temperature Accuracy:||+/- 4°F (+/- 2°C) typical|
|Temperature Scale:||°F and °C|
|Calibration Available:||Yes (purchased separately)|
|Power:||Meter Does Not Require Power / Light Powered via AC Power Supply|
|Special Notes:||NOTE: Do NOT use Temp Alert sensor in coolers or freezers. Frost build up may cause device to malfunction.|
|Wire Length:||20 Ft. Cable|
- (1) TempAlert Thermometer
- (1) Warning Alarm Light w/ 20 Ft. Cable
- (1) A/C Power Supply
- (1) Instruction Manual
- Expert Technical Support