|
|
SKU: METINF006
|
Infrared Non Contact Forehead Thermometer
Temperature Range: -7 ~ 176°F (-22 ~ 80°C)
Distance to Spot Size Ratio of 2:1
FDA Listed, Medical-Grade, High Accuracy
Forehead Mode Accuracy: +/- 0.4°F (0.2°C) of reading from 95 to 107.6°F (35 to 42°C)
High Temperature audible ALARM when measurement exceeds 99.5˚F
Includes Batteries / Auto-Off Saves Battery Power
Includes Employee Log Form
|
Price: $109.99
| | | 1 – 9 | $109.99 | | 10 – 49 | $104.49 | | 50 – 99 | $98.99 | | 100 – 249 | $93.49 | | 250 – 499 | $90.74 | | 500 + | $87.99 |
|
|
|
|
|
|
$250+ orders qualify for flat rate shipping, Exclusions Apply
$15 Minimum order value, not including shipping |
|
Additional Employee Temperature Log Book
|
|
|
Keep track of your employee's temperature conditions. Ensure safe work environment logging whether or not an employee is exhibiting a fever condition. |
|
|
|
Related Items / Spare Parts
|
|
Medical-Grade High Accuracy Infrared Thermometer
The Non-contact Clinical Thermometer, Model FT-2020 is an infrared thermometer intended for the intermittent measurement of human body temperature in people of all ages.
The last word when speed and accuracy for critical inspections of human body and common surfaces is in demand.
This is one the most accurate infrared thermometers manufactured today!
Temperature Sensing Range
|
-7 ~ 176°F (-22 ~ 80°C)
|
Operating Temperature Range
|
|
Temperature Accuracy
|
Accuracy +/- 0.4°F (0.2°C) of reading from 95 to 107.6°F (35 to 42°C)
|
Temperature Resolution
|
0.1°
|
Temperature Scale
|
°F or °C
|
Max Temp
|
|
Type of Sensor
|
IR Thermometer
|
Sensor Wire Length
|
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
|
Probe Length
|
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
|
Data Points
|
|
Min/ Max Memory
|
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
6" x 2" x 1.5"
|
Weight
|
0.25 lbs
|
Calibration Available
|
|
Display
|
BackLit LCD
|
Display Dimensions
|
|
Offset
|
|
Power
|
(2) AAA BAtteries
|
Battery Life
|
~3000 readings (typical)
|
Battery Backup
|
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
|
Humidity Range
|
|
Humidity Accuracy
|
|
Humidity Resolution
|
|
IP Rating
|
IP22
|
Special Notes
|
FDA Listed
|
View METINF006 Brochure
View METINF006 Instructions
View METINF006 Quick Start Guide
1. Always make sure the probe lens is clean without any damage and the forehead is clean.
*Warning: Choking from swallowing small parts and batteries by children or pets is possible, please keep small parts and batteries at places where children and pets can’t reach.
2. Power on: Press the “ON/MEM” button
3. Measuring body temperature on the forehead:
*Points for attention:
a. Forehead temperature is displayed in oral mode. This mode converts the forehead temperature to display its "oral-equivalent" value.
b. Before the measurement, the subject should stay in a stable environment for 5 minutes and avoid exercise, bath for 30mins.
c. Remember to keep the forehead area clean and away from sweat, cosmetics and scar while taking temperature.
d. The "Clinical Bias" is -2.5 ~ -3.1°F (-1.4 ~ -1.7°C).
e. The "Limits of Agreement" is 0.98.
f. The "Repeatability" is 0.36°F (0.20°C)
4. Measuring surface temperature:
4.1 After power on, press and hold the "ON/MEM" button, and press the "START" button one time for "Infrared thermometer" mode to see icon on your LCD display. In this mode, you can get the target surface temperature.
4.2 When you press the “START” button, you will get the real time temperature immediately. If you press and hold the “START” button, the reading of measurement will
be continuously updated.
4.3 Applications include temperature measurements for water, milk, cloth, skin or other objects.
* Note: This mode shows the actual and un-adjusted surface temperature which is different from the body temperature.
5. Power off:
5.1 Device will automatically shut off if left idle for more than 1 minute to extend battery life.
5.2 Manually power off the device by pressing the “ON/MEM” button.
- (1) Medical Grade IR Thermometer
- (2) AAA Batteries
- Expert Technical Support
- Employee Temperature Log Form
- Due to today's health concerns this product is not returnable. All sales are final.
|
|
|
|
