Stop crossing your fingers each time you worry about thermal abuse.
The Freeze-Warn Light System is a complete, self-contained, self-powered signal system with magnetic base. Rugged Preset Thermostat turns on flashing lights at 42°F. The light will automatically stop flashing when the temperature rises to 52°F. Uses AC 3V power supply.
The Freeze Warn I and its bright red flashing light alerts friends, neighbors or caretaker to possible heat loss or frozen pipe danger. Simple to understand, test and use. No complicated writing or installation required. The choice of real estate professionals; ski, vacation and weekend homeowners; farmers, fuel and oil dealers. Rugged, reliable, low-cost protection against the worry and cost of frozen water pipes or burst water pipes if your heating system should fail while you're away.
Before you leave home you should test the Freeze Warn Light: Simply place the sensor-disc portion inside your freezer. Close the door on the wire. With the light outside the Freezer wait 3-4 minutes the light will begin to flash. Remove the sensor from the freezer, place the sensor in your hands to warm it up. The light will turn off. TEST COMPLETE! The Light Consumes NO Power if the temperature is above 42°F. Notify your friends, neighbors or relatives when you're away.
View our entire list of Freeze Warn Lights
Note: Contact TIPTEMP about humidity warning lights or other custom designs.
Temperature Sensing Range
|
|
Operating Temperature Range
|
|
Temperature Accuracy
|
|
Temperature Resolution
|
|
Temperature Scale
|
|
Max Temp
|
|
Type of Sensor
|
|
Sensor Wire Length
|
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
|
Probe Length
|
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
|
Data Points
|
|
Min/ Max Memory
|
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
|
Weight
|
|
Calibration Available
|
|
Display
|
|
Display Dimensions
|
|
Offset
|
|
Power
|
|
Battery Life
|
|
Battery Backup
|
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
|
Humidity Range
|
|
Humidity Accuracy
|
|
Humidity Resolution
|
|
IP Rating
|
|
Special Notes
|
|
- Part Number FREALM013P02
- Freeze Warning Light Turns ON at 42°F / 7°C
- Automatically resets at 52°F / 11°C
- Accuracy ±3°F / 1.5°C
- 14 foot Sensor extension cord
- Power Source: 3V AC w/ 36" Cable ( Indoor Use ONLY )
- Magnetic Base Mount rated @ 17 lb. Pull
- Simple-to-follow instructions
- Proven & Reliable 1 Year Warranty
- Notifies security or neighbors of unfavorable temperature conditions
Indoor Use Only. Place Freeze Warn disc thermostat as close as possible to regular house thermostat or middle of room. Place signal light in window or other location where it is sure to be seen. Plug in power supply to wall outlet. When you are going to be away, just tell your friends and neighbors, fuel dealer, neighborhood watch, patrolling officer or use our custom made ALERT sign so anyone else who may pass by your house can take action if they see the Freeze Warn signal flashing.
- (1) Freeze Warn Light with Magnetic Base
- (2) AC 3V Power Supply w/ 36" Cable
- (1) 14 Ft. Extension with Sensor
- (1) Instruction Manual
- Expert Technical Support
<iframe src ="https://forms.na2.netsuite.com/app/site/crm/externalleadpage.nl?compid=825790&formid=19&h=AACffht_6yjX6wF7ix0uFLWcKKYta3yOQyE" width="100%"> </iframe>
