Unique and convenient instrument
Measures remote temperature/humidity sensor with a 7 foot cable. Ideal for routine measurements, monitoring round-the-clock, all quality-control needs, and critical experimental requirements. Place the sensor in hoods, clean rooms, coolers, stockrooms, incubators, environmental chambers, desiccators, and chemical storage areas.
Minimum and maximum memory
Triple display simultaneously shows high, low, and current humidity or high, low, and current temperature. Minimum and maximum memory feature for both temperature and humidity permits monitoring conditions overnight, on weekends, or any time period. External sensor on 7 foot cable reads temperature and humidity.
Alarm may be set in 1%RH and 1° increments. Alarm sounds when reading rises above or falls below set points.
Traceable to NIST
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).
Temperature Sensing Range
|
|
Operating Temperature Range
|
|
Temperature Accuracy
|
|
Temperature Resolution
|
|
Temperature Scale
|
|
Max Temp
|
|
Type of Sensor
|
|
Sensor Wire Length
|
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
|
Probe Length
|
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
|
Data Points
|
|
Min/ Max Memory
|
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
|
Weight
|
|
Calibration Available
|
|
Display
|
|
Display Dimensions
|
|
Offset
|
|
Power
|
|
Battery Life
|
|
Battery Backup
|
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
|
Humidity Range
|
|
Humidity Accuracy
|
|
Humidity Resolution
|
|
IP Rating
|
|
Special Notes
|
|
- Part number COCSEN066
- Remote Humidity/Temperature probe
- Hi/Lo Alarms
- Min/Max memories
- Temperature range is 58.0 to 158.0°F/50.0 to 70.0°C with resolution 0.1°
- Accuracy is ±1°C
- Humidity range is 20 to 99% with a resolution of 1%
- Accuracy is ±3%RH midrange to ±5%
- Size is 4-1/4 x 2-3/4 x 3/4 inches
- Weight is 4 ounces
- Supplied with a AAA battery and external humidity/temperature sensor
ALARM SOUNDING The unit will sound the alarm in the event an alarm limit
is breached, regardless of the display mode. In addition,
the alarm set point breached will flash on the display.
The unit will continue to alarm until acknowledged on the
device, even if the alarming parameter returns to within
range. To acknowledge an active alarm, press the CLR
MEM/+ button. Note pressing the button will not clear the
min/max if the unit is in an alarm state
- Instrument
- Battery
- Calibration Certificate
- Expert Technical Support