Dew-Point/Wet-Bulb/Humidity/Thermometer
Traceable Monitor shows current, minimum, and maximum displays and includes a settable high/low alarm for all four readings (dew-point, wet-bulb, humidity, and temperature). Alarm may be set in 0.1 increments. It sounds for one minute and red LED flashes until readings return to non-alarm condition.
Alarm sounds for 1 minute and red LED flashes until readings return to non-alarm conditions.
Alarm sounds for 1 minute and red LED flashes until readings return to non-alarm conditions.
| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -40°F ~ 158°F (-40°C ~ 70°C) |
| Temperature Accuracy: | +/- 2°F (+/- 1°C) typical |
| Temperature Resolution: | 0.1° |
| Temperature Scale: | °F or °C |
| Humidity Range: | 1.0 ~ 99.0% |
| Humidity Accuracy: | +/- 5% |
| Humidity Resolution: | 0.1% |
| Min/Max Memory: | Yes |
| Dimensions: | 4.125" x 4.125" x 1" |
| Weight: | 0.35 Lbs |
| Calibration Available: | Yes (included) |
| Power: | (2) AAA Batteries |
| Special Notes: | Traceable 4410 |
| Display: | LCD |
| Display Dimensions: | 1" LCD Digits |
- Temperature & Humidity Indicator
- Built-In Stand
- (2) AAA Batteries
- Instructions
- Expert Technical Support
Alarm sounds for 1 minute and red LED flashes until readings return to non-alarm conditions.
The following Temperature Display Modes are available:
Current Temperature Shows the current temperature.
Dew-Point Temperature Shows the Dew-Point temperature. Indicated by "TD" appearing to the right of the temperature display.
Wet-Bulb Temperature Shows the Wet-Bulb temperature. Indicated by "TW" appearing to the right of the temperature display.
Each press of the or button will cycle the display through the different temperature display modes.
Erratic readings, a faint display, or no display are all indications that the batteries must be replaced. Remove the bench stand (if installed). Slide the battery cover down in the direction of the arrow. Remove the exhausted batteries and replace with two new AAA alkaline batteries. Make certain to insert the new batteries with the proper polarity as indicated in the illustration in the battery compartment. Replace the battery cover.
The following Temperature Display Modes are available:
Current Temperature Shows the current temperature.
Dew-Point Temperature Shows the Dew-Point temperature. Indicated by "TD" appearing to the right of the temperature display.
Wet-Bulb Temperature Shows the Wet-Bulb temperature. Indicated by "TW" appearing to the right of the temperature display.
Each press of the or button will cycle the display through the different temperature display modes.
Erratic readings, a faint display, or no display are all indications that the batteries must be replaced. Remove the bench stand (if installed). Slide the battery cover down in the direction of the arrow. Remove the exhausted batteries and replace with two new AAA alkaline batteries. Make certain to insert the new batteries with the proper polarity as indicated in the illustration in the battery compartment. Replace the battery cover.