8 Input Temp Alarm Phone Dialer

When you need to monitor additional conditions, or need to notify more people, the 800 is the best choice. It has all of the same features as the 400, but instead of four external inputs, it is equipped with eight. And instead of being able to notify four people, it can notify eight using the same custom voice phone call technology. And like the 400, one of the external inputs comes with a local temperature sensor installed.

The 800 has a built-in ability to monitor for power failures and to listen to the sound of a smoke detector. There are also eight external inputs that can be connected to a variety of sensors to monitor temperature, water on the floor, humidity, and much more. One of the eight external inputs already comes with a temperature sensor for monitoring temperature where the 800 is installed.

When an alarm is detected, the Sensaphone 800 can notify up to eight people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The voice messages can be custom recorded, so you get to describe each alarm message that it speaks in your own voice. The phone interface includes a line seize feature so that extension phones are automatically disconnected when it needs to make an alarm phone call.

A built-in output relay is provided to switch an external device either automatically, or manually. You can use it to have a local light or siren trip when an alarm occurs, or even to set off a local alarm when the phone line is cut or unplugged. You can even use it to control a dual setback thermostat to change the temperature remotely. Also includes nonvolatile memory and a 24-hour battery backup with user installed batteries.

Temperature Sensing Range
Operating Temperature Range
Temperature Accuracy
Temperature Resolution
Temperature Scale
Max Temp
Type of Sensor
Sensor Wire Length
Sensor Type
Sensor Style
Sensor Dimensions
Probe Length
Sheath Diameter
Sheath Length
Sheath Material
Wire Gauge
Wire Length
Wire Material
Special Limits
Stripped Leads Length
Transition Diameter
Transition Length
Plug Size
Jack Size
Time Constant
Response Time
Number of Measuring Points
Number of Events
Color Change
Number of Sensors
Data Points
Min/ Max Memory
Recording Rate
Sampling Rate
Transmission Rate
Exportable Data
Software Required
Software Type
Network Connectivity
WiFi Network
Dimensions
Weight
Calibration Available
Display
Display Dimensions
Offset
Power
Battery Life
Battery Backup
Location
Adhesive
Adhesive Type
Shelf Life
Storage Conditions
Humidity Range
Humidity Accuracy
Humidity Resolution
IP Rating
Special Notes

• Part number SNPALM004
• Size: 71/2" W 2" H 81/2" D
• Shipping Weight: 4 lbs
• Batteries: (6) 1.5 Volt "C" cell alkaline (not included)
• Telephone Connection: FCC approved RJ-11 plug-in modular connector with 6' cord
• Operating Temperature Range: Unit should be kept between 32° F and 120° F
• Temperature Sensing Range: -20° F to 150° F with remote temperature sensor
• 8 External Inputs - can be set for temperature or contact closure open or closed

• Instruction Manual

• 8 Alarm Inputs, Dry Contact or Temperature (-20F to 150F)
• Comes with pre-wired temperature sensor on input #1
• Built-in AC Power failure sensing
• Built-in high sound level detection
• Built-in microphone for listening in
• 8 Dial-Out Phone Numbers, up to 32 digits each
• Intelligently dials out to numeric beepers or pagers
• 24 Hour Battery Backup (with user-installed batteries)
• Battery Condition Monitor
• Phone line integrity monitor
• Line seizure
• Output Relay

• Model 800 Phone Dialer Alarm
• 120V Power Supply / Transformer
• Ambient Temperature Sensor on Ch.#1
  
• Instructions
• Expert Technical Support