Heat-Warn Alarm light has been designed to alert a watch person
that the inside temperature is rising or has increased and unfavorable conditions may
exist.
The thermostat sensor should be placed at a location that represents
the real inside temperature, and away from drafts and sunlight that
effect it's sensitivity. Mounting hole allows sensor to be mounted, or
you could let it hang from the wire or use Velcro. Tell your security
service or watch person about your Heat-Warn light system. It is
important that everyone know what the red flashing signal represents.
Your immediate attention to check and restore proper room temperature.
Temperature Sensing Range
|
50°F ~ 110°F ( 10°C ~ 43°C )
|
Operating Temperature Range
|
|
Temperature Accuracy
|
+/- 6°F (+/- 3°C) typical
|
Temperature Resolution
|
|
Temperature Scale
|
°F and °C
|
Max Temp
|
|
Type of Sensor
|
Bi-Metal
|
Sensor Wire Length
|
15 Ft. Cable from light to sensor
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
|
Probe Length
|
Thermostat attached to 15 Ft. Cable ( Longer Lengths Available)
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
|
Data Points
|
|
Min/ Max Memory
|
No
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
5.5" High
|
Weight
|
1.85 lbs
|
Calibration Available
|
|
Display
|
|
Display Dimensions
|
|
Offset
|
|
Power
|
(2) "D" Batteries ( 400 hours flashing )
|
Battery Life
|
12 months ( depending on activity / 4 weeks on Continuously)
|
Battery Backup
|
No
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
|
Humidity Range
|
|
Humidity Accuracy
|
|
Humidity Resolution
|
|
IP Rating
|
Brightness/Visibility: 5-6cd - over 1,000 ft.
|
Special Notes
|
Light stops flashing when temperature rises 10° above dialed-in setpoint
|
- Part number TIPALM009
- Alarm Light Flashes when Temperature RISES
- aVoltage: 3 VDC
- Flash Rate: 60 double flashes per min.
- Lamp/Bulb: (5) super bright Red LED's/ 100,000 hours
- Brightness/Visibility: 5-6cd - over 1,000 ft.
- Power Source: (2) D-Cell (included)
- Battery Life: 400 hours (flashing)
- Lens: Polycarbonate - Clear
- Thermostat attached to 15 Ft. Cable ( Longer Lengths Available)
- Thermostat Adjustable settings 50° F to 110°F
View TIPALM009 Instructions
-
Walk-in Coolers ( Food Service )
-
Elderly Home Alone
-
Greenhouses
-
Kennels
Heat Warning Alarm Light
(2) D Batteries
Instructions
Expert Technical Support
<iframe src ="https://forms.na2.netsuite.com/app/site/crm/externalleadpage.nl?compid=825790&formid=19&h=AACffht_6yjX6wF7ix0uFLWcKKYta3yOQyE" width="100%"> </iframe>
