• Home
  • COCSEN018: Traceable Full-Scale Thermometer

Traceable Full-Scale Thermometer with Probe.

(0)No Reviews yet
$83.45
QuantityPrice
1 – 9$83.45
10 – 24$79.29
25 – 49$75.11
50 – 74$70.94
75 – 99$68.85
100 +$66.76
SKU: COCSEN018
Provided: Each
-58°F ~ +572°F (-50°C ~ +300°C)
Programmable Alarm Beeps 4 Times per Minute
  • Probe Dimensions: 5.75" and 0.14" Dia.
  • Cable Length: 10 Foot Cable Length
  • LCD Digit Size: 3/8"
  • Notable Features

    Readings are updated every second and displayed on a 3/8-inch LCD readout. Magnetic back allows for placement on a metal surface (incubators, freezers, water baths). Unit also incorporates flip-open easel for use on lab bench and spring fastener for clipping to any edge. Stainless-steel probe with piercing tip allows constant exposure to extreme temperatures at the ends of the range.

    Traceable to NIST for accuracy:

    To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

    • Product number COCSEN018
    • Range and Accuracy (vary according to model):
    • Traceable Full-Scale Thermometer; Range is -58 to 500°F/-50 to 250°C; Accuracy is ±1.0°C between -20 to 100°C
    • Traceable Ultra Full-Scale Thermometer; Range is -58 to 500°F/-50 to 250°C; Accuracy is ±0.5°C at tested points
    • Traceable Full-Scale Plus Thermometer; Range is -58 to 572°F/-50 to 300°C; Accuracy is ±1.0°C between -20 to 100°C
    • Traceable Ultra Full-Scale Plus Thermometer; Range is -58 to 572°F/-50 to 300°C; Accuracy is ±0.5°C at tested points
    • Resolution is 0.1° above -20 to 200 and 1° elsewhere
    • Thermometer diameter is 2.1 inches and depth is 9/16 inch
    • Dimensions: probe length is 5-1/2 inch and 0.14 inch diameter
    • Piercing probe tip
    • Flip-open easel for standing on lab
    • Stainless-steel probe and 10-foot cable
    • Plus models include the following features: high/low alarm minimum/maximum memories and hold
    • Supplied with 1.5V silver-oxide battery
    • Full Scale Thermometer
    • Battery included
    • Instructions
    • Expert Technical Support
    TEMPERATURE ALARM SETTING: 1. Press and hold the “LO ALM” or “HI ALM” button for setting alarm at desired minimum or maximum temperature limit. When near the desired alarm setting release the button and increment by one degree by pressing the button once for each degree. When the set temperature is achieved wait 3 seconds, and the temperature will be set and the display will return to current temperature. “LOW” or “HIGH” will show on the display indicating the alarm has been set. 

    2. Alarm will sound 4 beeps per minute when the measured temperature equals or is greater than the maximum or less than the minimum set values. To stop beeping, press any button while the unit is beeping. 

    3. To delete the alarm setting, press the “°F /°C” or “ON/OFF” button.

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review