See Alternative AMBALM002
Read humidity and temperature from 100 feet away:
Traceable® Radio-Signal Remote Humidity Meter/Thermometer receives a radio signal from the remote wireless sensors. It eliminates the cable. Place the main unit at your desk or bench. Place the remote sensor module in labs, ducts, and storage facilities” even outdoors. Remote sensor sends humidity and temperature signals to the main digital display. Transmits on a frequency of 433 MHz. Range is 65 to 100 feet, depending on the location or number of walls. Read up to three modules:
Main unit can receive and display data from up to three different remote sensor modules. Only channel 1 can have an alarm set. Data is transmitted every 30 seconds. Display's trend indicators show if humidity and temperature are rising or falling. Minimum and maximum memory display allows monitoring of conditions over short or long periods, including overnight or weekends. An alarm may be set in increments of 1%RH and 1°. The alarm sounds when the humidity or temperature exceeds the high and low set points.
Notice:
Please read our Support Statements.
Temperature Sensing Range
|
-4°F ~ 140°F (-20°C ~ 60°C)
|
Operating Temperature Range
|
|
Temperature Accuracy
|
|
Temperature Resolution
|
|
Temperature Scale
|
|
Max Temp
|
|
Type of Sensor
|
Thermistor
|
Sensor Wire Length
|
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
|
Probe Length
|
Internal
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
(1) Temp / (1) Humidity
|
Data Points
|
|
Min/ Max Memory
|
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
4-1/4 x 4-1/2 x 3/4 inches
|
Weight
|
6 ounces
|
Calibration Available
|
|
Display
|
|
Display Dimensions
|
|
Offset
|
|
Power
|
2 AA Batteries
|
Battery Life
|
|
Battery Backup
|
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
Range is 65 to 100 feet
|
Humidity Range
|
25 to 90%
|
Humidity Accuracy
|
±2%RH mid-range to ±4%RH elsewhere
|
Humidity Resolution
|
1%
|
IP Rating
|
|
Special Notes
|
|
- Part number COCSEN062
- Transmits on a frequency of 433 MHz
- Range is 65 to 100 feet
- Relative humidity range is 25 to 90%
- Resolution of 1%
- Accuracy of ±2%RH mid-range to ±4%RH elsewhere
- Thermometer range is 4 to 140°F and 20 to 60°C
- Temperature resolution is 0.1°
- Temperature accuracy is ±1°C
- Size of main unit is 4-1/4 x 4-1/2 x 3/4 inches
- Weight is 6 ounces
- Remote sensor module is 2-1/3 x 3-1/2 x 3/4 inches
- Weight is 3 ounces
- Jumbo digits 1-3/8-inches-high
- Supplied complete with Traceable Certificate one remote sensor module internal humidity sensor internal temperature sensor and alkaline batteries.
- Instructions
- COCSEN062 can only set an alarm for channel 1 and NOT channel 2 or 3.
- Remote Transmitters only display in °C
- Using More than one "Base Unit & Transmitter" system in close proximity with each other will cause signal interference.
- Multiple main units must be more than 400’ apart
- Returns will be accepted for defective instruments only.
- (1) Base Unit / Main Display
- (1) Remote Humidity/Temperature Thermometer
- Instructions
- Calibration Certificate
- Batteries for both units.
- Technical Support