The EL-WIFI-TP data logger comes with an external temperature sensor allowing it to measure the temperature of environments that are not suitable for the logger itself, such as a fridge or freezer. Data is transmitted wirelessly via a WiFi network to a PC and viewed using a free software package. During configuration the sensor will search for an existing wireless network whilst physically connected to the PC. It can then be placed anywhere within range of the network. If the sensor temporarily loses connectivity with the network, it will log readings until it is able to communicate again with the PC application (max 60 days at 10 second sample interval). The range of the instrument can be increased by using WiFi extenders.
This EL-WiFi-TP is a low powered battery device. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year. The battery can then be recharged via a PC or USB +5V wall adapter using the USB lead provided.
The battery is safely charged when the unit is operating between 0 to +40°C (+32 to +104°F). It is protected against charging outside this temperature range. Sensor readings may be inaccurate during battery charging.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available for free from our Support page (link to support/downloads page).
This data logger stands alone by itself on a vertical surface and comes with a wall bracket that can be screwed onto a wall or flat surface. The data logger clips into the bracket.
Requires 802.11b compliant WiFi router/network. Compatible with Enterprise Networks from September 2013
Temperature Sensing Range
|
-40°F ~ 257°F (-40°C ~ 125°C)
|
Operating Temperature Range
|
|
Temperature Accuracy
|
+/- 1°F (+/- 0.5°C) typical
|
Temperature Resolution
|
|
Temperature Scale
|
°F and °C
|
Max Temp
|
|
Type of Sensor
|
Thermistor
|
Sensor Wire Length
|
3ft (~100cm) High Temp Flexible Cable
|
Sensor Type
|
|
Sensor Style
|
|
Sensor Dimensions
|
0.20" Dia
|
Probe Length
|
|
Sheath Diameter
|
|
Sheath Length
|
|
Sheath Material
|
|
Wire Gauge
|
|
Wire Length
|
|
Wire Material
|
|
Special Limits
|
|
Stripped Leads Length
|
|
Transition Diameter
|
|
Transition Length
|
|
Plug Size
|
|
Jack Size
|
|
Time Constant
|
|
Response Time
|
|
Number of Measuring Points
|
|
Number of Events
|
|
Color Change
|
|
Number of Sensors
|
ONE
|
Data Points
|
1 Milliion
|
Min/ Max Memory
|
|
Recording Rate
|
|
Sampling Rate
|
|
Transmission Rate
|
|
Exportable Data
|
|
Software Required
|
|
Software Type
|
|
Network Connectivity
|
|
WiFi Network
|
|
Dimensions
|
|
Weight
|
.45
|
Calibration Available
|
Yes (purchased separately)
|
Display
|
|
Display Dimensions
|
|
Offset
|
|
Power
|
Rechargable Battery
|
Battery Life
|
|
Battery Backup
|
|
Location
|
|
Adhesive
|
|
Adhesive Type
|
|
Shelf Life
|
|
Storage Conditions
|
|
Humidity Range
|
|
Humidity Accuracy
|
|
Humidity Resolution
|
|
IP Rating
|
IP55: Dust Resistant & Hosed water
|
Special Notes
|
|
- Part number LASREC015
- Measure and Record Temperature Using External Thermistor
- Wireless connectivity to PC via WiFi
- -40°C to 125°C Temperature Measurement Range with ±0.6°C / 1.2°F Accuracy (typical) ±2°C Accuracy (maximum)
- 20" / 50cm High Temp Flexible Cable w/ Tight Bend Radius & 304 Stainless Steel End Cap
- 802.11b Wireless Standards Compliance with IP 55 (Unit) and IP67 (Sensor)
- Logs 1 Million Readings by WIrelessly Transmitting the Data Back to PC Computer
- LCD Shows Current Temperature Battery Status and Alarm Status
- 10 Second to 12 Hour User-Selectable Sampling Rate
- PC Software (Available as Download) Allows for Easy Sensor Setup & Graphing Historical Data
- Includes Thermistor Probe Micro USB Cable and Wall Bracket
- Thermistor Probe is 3ft long
- View and analyze multiple sensors using the PC application including immediate graphing of historic data
- Sensor memory stores all data even if WiFi is temporarily disconnected
- IP55: Dust Resistant & Hosed water
- Rechargeable internal lithium polymer battery
- ( New Unit requires initial 24 hr. power charge and will last 6 months )
- Configurable high and low alarms with indicator
- Max & Min readings Low battery indicator WiFi connection indicator
- USB port used for recharging
This instruments must connect to a WIFI Network that YOU manage. Not recommended for Public WiFi use. For Rita's Water Ice this instrument is ideal for monitoring chest / upright freezers in your building with WIFI.
- Wifi Data Logger
- 3 Ft. Thermistor Probe ( can be extended )
- Micro USB Cable
- Software (Free Download Above)
- Rechargeable Battery
- Wall-Mount Clip
- Instructions
- Expert Technical Support
