RTD1-100L-SS-14-5.25
| Type of Sensor: | RTD |
| Temperature Sensing Range: | -58 ~ 500°F (-50 ~ 260°C) |
| Sheath Material: | Stainless Steel |
| Sheath Diameter: | 0.250 |
TIPTEMP RTD's are available in a variety of styles. The weather-proofed screw cover style provides an electrical conduit connection and can be used to house a transmitter (optional). For open system sensing, a non-threaded style is offered. This design is provided with integrated leadwire and can be Teflon covered to protect the stem and leadwire against corrosive environments. A standard plug with a mating jack may also be furnished.
Stem (Sheath)
All TIPTEMP RTDs are furnished with a 316 stainless steel stem, with the internal wiring packed in powdered ceramic. The screw head cover style is available in two stem types: welded and spring loaded. The welded stem is suitable for use in liquid applications. The spring loaded stem is designed to bottom out inside a thermowell, providing maximum heat sensitivity. Spring loaded stems are not pressure tight and may allow process media to escape; therefore, they must always be installed in a thermowell.
Insertion (U) Length
The insertion (U) length of an RTD represents its depth into the process vessel or thermowell. TIPTEMP RTDs are available in standard U-lengths from 2" to 24". Other lengths are available upon special order, please consult factory.
Measuring (Hot) Junction
TIPTEMP RTDs are a platinum, 3-wire design, and are furnished with either 100Ω or 1000Ω resistance at 32°F (0°C), and a temperature coefficient of 0.00385 Ω/Ω/°C.