TiltWatch XTR Tip Indicating Label
TiltWatch Plus indicates whether there has been tilt to the left or right, the degree of the tilt, or if a complete overturn has occurred. User Hand-Activated.
| Type of Sensor: | Chemical / Tilt |
| Temperature Sensing Range: | -40F to 140F |
| Humidity Range: | 5% to 99% Non-condensing |
| Dimensions: | 2.92in x 2.37in x 0.21in |
| Weight: | .5 oz. |
| Adhesive: | Yes |
| Number of Events: | 1 |
| Color Change: | Permanent |
| Shelf Life: | 2 Years |
| Adhesive Type: | 2 mil high tack acrylic |
- TiltWatch Indicators (User Activated)
- Companion Labels
1. Peel the adhesive liner from the back of the TiltWatch XTR while holding it in an upright position. Once the adhesive liner is removed, the TiltWatch XTR is armed. Apply the TiltWatch XTR to an oil-free surface in an environment above 10°C / 50°F for best results.
2. Place the TiltWatch XTR in an upright position near the lower corner of the shipping container. Mounting as low as possible provides the best response.
3. Press the TiltWatch XTR firmly in the center and around the edges to ensure doting adhesion to the container to which it is being applied.
Tip:
Rough wood and heavily waxed wood containers may require special attention. If the wood is extremely rough, we recommend the use of a spray adhesive to increase bonding strength.
2. Place the TiltWatch XTR in an upright position near the lower corner of the shipping container. Mounting as low as possible provides the best response.
3. Press the TiltWatch XTR firmly in the center and around the edges to ensure doting adhesion to the container to which it is being applied.
Tip:
Rough wood and heavily waxed wood containers may require special attention. If the wood is extremely rough, we recommend the use of a spray adhesive to increase bonding strength.