• Home
  • COCSEN066: Traceable Remote Alarm RH/Temp. Monitor

Traceable Remote Alarm RH/Temp. Monitor

(0)No Reviews yet
1 – 9$93.83
10 – 24$89.13
25 – 49$84.44
50 – 74$79.76
75 – 99$77.41
100 +$75.06
Provided: Each
T-Range: -58°F ~ 158°F ( -50°C ~ 70°C )
H-Range: 20 ~ 99%
AAA Battery Operation

Notable Features

Unique and convenient instrument

Measures remote temperature/humidity sensor with a 7 foot cable. Ideal for routine measurements, monitoring round-the-clock, all quality-control needs, and critical experimental requirements. Place the sensor in hoods, clean rooms, coolers, stockrooms, incubators, environmental chambers, desiccators, and chemical storage areas.

Minimum and maximum memory
Triple display simultaneously shows high, low, and current humidity or high, low, and current temperature. Minimum and maximum memory feature for both temperature and humidity permits monitoring conditions overnight, on weekends, or any time period. External sensor on 7 foot cable reads temperature and humidity.

Alarm may be set in 1%RH and 1° increments. Alarm sounds when reading rises above or falls below set points.

Traceable to NIST
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

  • Part number COCSEN066
  • Remote Humidity/Temperature probe
  • Hi/Lo Alarms
  • Min/Max memories
  • Temperature range is 58.0 to 158.0°F/50.0 to 70.0°C with resolution 0.1°
  • Accuracy is ±1°C
  • Humidity range is 20 to 99% with a resolution of 1%
  • Accuracy is ±3%RH midrange to ±5%
  • Size is 4-1/4 x 2-3/4 x 3/4 inches
  • Weight is 4 ounces
  • Supplied with a AAA battery and external humidity/temperature sensor
  • Instrument
  • Battery
  • Calibration Certificate
  • Expert Technical Support
ALARM SOUNDING The unit will sound the alarm in the event an alarm limit is breached, regardless of the display mode. In addition, the alarm set point breached will flash on the display. The unit will continue to alarm until acknowledged on the device, even if the alarming parameter returns to within range. To acknowledge an active alarm, press the CLR MEM/+ button. Note pressing the button will not clear the min/max if the unit is in an alarm state

Ratings & Reviews

No reviews available

Be the first to Write a Review