Ramp Soak Benchtop Controller - J Type
JKMCON270J01 Digital Temperature Controller only.
The controller includes a primary digital meter for temperature control and an independent secondary digital meter as an over-temperature backup.
The system contains a power reduction circuit. Allowing for 0.1C regulation of any process. The primary setpoint meter is a CAL 9500 multi-ramp meter.
Ramp-to-Setpoint feature allows heating at a user-specified heating rate. Temperature control and resolution of 0.1ºC. Double fused.
An Independent over-temperature protection circuit allows the user to enter an ‘over-temperature’ limit at which power is turned off until manually reset by the user.
The controller includes a primary digital meter for temperature control and an independent secondary digital meter as an over-temperature backup.
The system contains a power reduction circuit. Allowing for 0.1C regulation of any process. The primary setpoint meter is a CAL 9500 multi-ramp meter.
Ramp-to-Setpoint feature allows heating at a user-specified heating rate. Temperature control and resolution of 0.1ºC. Double fused.
An Independent over-temperature protection circuit allows the user to enter an ‘over-temperature’ limit at which power is turned off until manually reset by the user.
- Two 120 vac outlets are provided for large heaters.
- 120Vac input, 15 amps, 1800 watt maximum output.
- Type J thermocouple
- Temperature range: -50º to 1200ºC
- Includes USB serial communications card and free data logging and graphing software.
- KEM-NET software provides an Excel-style input table for entering multi-ramp programs for the Primary 9500 Controller.
- Rugged Metal Enclosure
- 4-digit display 1 or 0.1 resolution
- Full autotune PID Heat/Cool control
- Fused AGC 12 Amp Main
- Ramp and soak
- Models with Thermocouple RTD Voltage and Current inputs
- Back up "HIGH LIMIT" Safety Controller
- Heater Light (Shows heater is operating)
- Reset button
- Optional RS-232 or RS-485 Communications
- Optional Data Logging Software
- Call to discuss your application
- Benchtop Controller
- Expert Technical support
- Instructions
Ramp-to-Setpoint feature allows heating at a
user-specified heating rate. Temperature control
and resolution of 0.1ºC. Double fused.
Independent over-temperature protection circuit
allows the user to enter an ‘over-temperature’ limit
at which power is turned off until manually reset
by the user.
Two 120 vac outlets are provided for large heaters.
120Vac input, 15 amps, 1800 watt maximum output.
Type J thermocouple
Temperature range: -50º to 1200ºC
Includes USB serial communications card and free
data logging and graphing software. KEM-NET software
provides an Excel-style input table for entering multi-ramp
programs for the Primary 9500 Controller.
user-specified heating rate. Temperature control
and resolution of 0.1ºC. Double fused.
Independent over-temperature protection circuit
allows the user to enter an ‘over-temperature’ limit
at which power is turned off until manually reset
by the user.
Two 120 vac outlets are provided for large heaters.
120Vac input, 15 amps, 1800 watt maximum output.
Type J thermocouple
Temperature range: -50º to 1200ºC
Includes USB serial communications card and free
data logging and graphing software. KEM-NET software
provides an Excel-style input table for entering multi-ramp
programs for the Primary 9500 Controller.