• Home
  • LASREC031: Cold Chain Logger for Frozen Goods

Cold Chain Logger for Frozen Goods

(0)No Reviews yet
Provided: Each
-22°F ~ 140°F (-30°C ~ 60°C)
Pre-programmed Alarm High 3°F, Low -4°F (-16°C, -20°C)
10 Year Shelf Life


Current Stock: 10

Notable Features

Cost effective, multi-use loggers for all stages of the Cold Chain Monitoring.  Pre-programmed Alarm and  Sample rates for monitoring Frozen Goods , simply press an on-board button to start logging.
  • High Alarm: 3°F / -16°C
  • Low Alarm: -4°F / -20°C
  • Sampling Rate: Every 10 Minutes
Status LEDs indicate whether the unit is currently in logging mode, an alarm has been met during the session or the battery is low.  Includes FREE Software and protective plastic casing.

Various export options including PDF, Microsoft Excel and JPEG

Type of Sensor: Thermistor
Temperature Sensing Range: -22°F ~ 140°F (-30°C ~ 60°C)
Temperature Accuracy: +/- 1°F (+/- 0.5°C) typical
Temperature Resolution: 0.1°
Temperature Scale: °F and °C
Dimensions: 1.5" x 2.5"
Weight: 0.05 lb.
Calibration Available: Please Call to Discuss
Battery Life: 1 Year
IP Rating: IP67 ( Only when housed in EL-CC-Bag or equivalent
Special Notes: 10 Year Shelf Life
Data Points: 32,600 Samples Readings.
Exportable Data: Yes
Recording Rate: Every 10 Minutes
Display: None
Software Type: Windows 10, 8, 7 (32-bit and 64-Bit Versions)
Network Connectivity: N/A
  • (1) Multi-Use Pre-Programmed for Frozen Goods Temperature Recorder
  • Waterproof Sealed Pouch
  • FREE Software Download
This Cold Chain logger works right-out-of the box. It comes pre-configured for use with Frozen Goods monitoring.
  • High Alarm: 3°F / -16°C
  • Low Alarm: -4°F / -20°C
  • Sampling Rate: Every 10 Minutes
You simply press the button to start logging. During a logging session, pressing the button again will light up the status LEDs to give a quick indication as to whether the temperature has exceeded an alarm condition at any point. Once your session has been completed, tear open the IP67-rated plastic wallet to reveal the USB connector and plug it in to your PC. Use the free EasyLog CC software for Windows to download and graph the data, and then prime your logger for its next use.

After a logging session is completed, remove the logger from waterproof bag and connect to your PC via USB. Use the software to retrieve, view, analyze, and export data. The software can reset the logger for continued use; requires replacement waterproof bags (sold separately).

Ratings & Reviews

No reviews available

Be the first to Write a Review