Single Use Cold Chain Logger for Platelet Transportation
Available in packs of 10, the ultra low cost single-use LASREC051 Platelet Transportation data logger measures and stores both temperature and humidity information.
The unit comes pre-configured with High 24°C and Low 20°C Alarms - simply press the button to start logging. During a logging session, pressing the button will light up the status LEDs to give a quick indication of whether the temperature has exceeded an alarm condition at any point.
Once your session is completed, tear open the IP67-rated plastic wallet to reveal the USB connector and plug it in to your PC. Use the free EasyLog CC software for Windows to download and graph the data.
The unit comes pre-configured with High 24°C and Low 20°C Alarms - simply press the button to start logging. During a logging session, pressing the button will light up the status LEDs to give a quick indication of whether the temperature has exceeded an alarm condition at any point.
Once your session is completed, tear open the IP67-rated plastic wallet to reveal the USB connector and plug it in to your PC. Use the free EasyLog CC software for Windows to download and graph the data.
| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -22°F ~ 158°F (-30°C ~ 70°C) |
| Temperature Accuracy: | +/- 0.6°F (+/- 0.3°C) typical |
| Temperature Resolution: | 0.1° |
| Temperature Scale: | °F and °C |
| Humidity Range: | 0 ~ 100 % |
| Humidity Accuracy: | +/- 2% |
| Humidity Resolution: | 0.1% |
| Min/Max Memory: | Yes |
| Dimensions: | 67 mm (2.6”) x 48 mm (1.8”) |
| Battery Life: | 12 months |
| IP Rating: | IP67 |
| Sampling Rate: | 10 minutes (220 days until full) |
| Sold As: | Pack of 10 Pieces |
| Data Points: | 32,637 Temp & 32,637 RH |
- (10) Pre-Programmed Platelet Transportation Temperature Recorder ( Single-Use )
- Sealed in Waterproof Pouch
- Pre-Set High Alarm: 75°F / 24°C
- Pre-Set Low Alarm: 68°F / 20°C
- Sample Rate: 10 minutes (220 days until full)
- LASREC051 Pharma / Medical Monitoring Sales Sheet
- LASREC051 Quick Start Guide
- Sample Rate: 10 minutes (220 days until full)
The unit comes pre-configured with High 24°C and Low 20°C Alarms - simply press the button to start logging. During a logging session, pressing the button will light up the status LEDs to give a quick indication of whether the temperature has exceeded an alarm condition at any point. Once your session is completed, tear open the IP67-rated plastic wallet to reveal the USB connector and plug it in to your PC. Use the free EasyLog CC software for Windows to download and graph the data.