⚖️ Temp & Humidity Cert@ 21°C / 50%RH
This temperature and relative humidity calibration certificate provides documented verification of instrument performance using standards traceable to NIST. Calibration is performed at approximately 70.9°F (21.6°C) with relative humidity testing within the 5% to 75% RH range.
The calibration laboratory conforms to ISO/IEC 17025 standards. Results are evaluated against defined acceptance limits of ±0.9°F (±0.5°C) for temperature and ±5% RH for humidity, with pass/fail documentation supplied.
──────────────────────────
Ideal Applications
💧 Temperature and humidity instruments
📈 Environmental data loggers
🏥 Healthcare and pharmaceutical monitoring
🧪 Laboratories and controlled environments
🏭 Quality assurance programs
📦 Temperature-sensitive storage areas
📋 Equipment validation documentation
Compliance & Risk Mitigation
🇺🇸 NIST traceability supports documentation
🏢 ISO/IEC 17025 lab supports quality programs
🎯 Defined tolerances establish acceptance limits
📋 Pass/fail results document instrument status
⚖️ Calibration helps identify measurement drift
📅 Annual calibration supports validation
Calibration documents instrument performance at the specified calibration conditions and acceptance limits; it does not certify accuracy outside the points or ranges tested. Annual calibration is an important part of maintaining equipment validation and confirming that temperature and humidity instruments continue to operate and measure properly.
──────────────────────────