Traceable Radio-Signal Remote Humidity/Temperature Thermometer
Read humidity and temperature from 100 feet away:
Traceable® Radio-Signal Remote Humidity Meter/Thermometer receives a radio signal from the remote wireless sensors. It eliminates the cable. Place the main unit at your desk or bench. Place the remote sensor module in labs, ducts, and storage facilities” even outdoors. Remote sensor sends humidity and temperature signals to the main digital display. Transmits on a frequency of 433 MHz. Range is 65 to 100 feet, depending on the location or number of walls.
Traceable® Radio-Signal Remote Humidity Meter/Thermometer receives a radio signal from the remote wireless sensors. It eliminates the cable. Place the main unit at your desk or bench. Place the remote sensor module in labs, ducts, and storage facilities” even outdoors. Remote sensor sends humidity and temperature signals to the main digital display. Transmits on a frequency of 433 MHz. Range is 65 to 100 feet, depending on the location or number of walls.
Read up to three modules:
Main unit can receive and display data from up to three different remote sensor modules. Only channel 1 can have an alarm set. Data is transmitted every 30 seconds. Display's trend indicators show if humidity and temperature are rising or falling. Minimum and maximum memory display allows monitoring of conditions over short or long periods, including overnight or weekends. An alarm may be set in increments of 1%RH and 1°. The alarm sounds when the humidity or temperature exceeds the high and low set points.
Notice:
Please read our Support Statements.
| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -4°F ~ 140°F (-20°C ~ 60°C) |
| Humidity Range: | 25 to 90% |
| Humidity Accuracy: | ±2%RH mid-range to ±4%RH elsewhere |
| Humidity Resolution: | 1% |
| Dimensions: | 4-1/4 x 4-1/2 x 3/4 inches |
| Weight: | 6 ounces |
| Power: | 2 AA Batteries |
| Storage Conditions: | Range is 65 to 100 feet |
| Number of Sensors: | (1) Temp / (1) Humidity |
- (1) Base Unit / Main Display
- (1) Remote Humidity/Temperature Thermometer
- Instructions
- Calibration Certificate
- Batteries for both units.
- Technical Support
- Instructions
- COCSEN062 can only set an alarm for channel 1 and NOT channel 2 or 3.
- Remote Transmitters only display in °C
- Using More than one "Base Unit & Transmitter" system in close proximity with each other will cause signal interference.
- Multiple main units must be more than 400’ apart
- Returns will be accepted for defective instruments only.