• Home
  • TLCSEN401: Temperature Label Medication Storage Safety Guide

Medication Storage Safety Guide & Thermometer

(0)No Reviews yet
Provided: Each
32°F ~ 54°F (0°C ~ 12°C)Sold in pack of 3
Instant Response - Continuous Readout

Special Order: Terms & Conditions Apply.

Notable Features

Take the guesswork out of reading your medical refrigerators ideal temperature. Simply affix this Medication Storage Safety Guide Thermometer onto any clean dry surface in the BACK of your refrigerator. A guide that includes the ideal medication temperature with instructions and warnings for easy reference. If the temperature reads in the appropriate window a visual OK is displayed. If the temperature is out of range due to unfavorable conditions a message is displayed with corrective action steps. No batteries required

Intended use: To provide an easy to read indication of the refrigerators internal temperature.

How to use: For best results apply to inside back or middle side of refrigerator. (applying to front area will not produce accurate results)

Clean the area you intend to apply with alcohol and allow time to dry. Peel off the back carrier and position label for best viewing. Close door and wait 15 - 20 minutes.

How to read. Thermochromic Liquid Crystals (TLC) are materials that change their molecular structure and optical properties with temperature change. Also known as a color phase change. The GREEN HIGH-LIGHTED portion of the label represents the current temperature condition.

Type of Sensor: Liquid Crystal / Reversible
Temperature Sensing Range: 32°F ~ 54°F (0°C ~ 12°C)
Temperature Accuracy: +/- 2°F (+/- 1°C) typical
Temperature Scale: °F and °C
Dimensions: 5.25" x 1.5"
Weight: .015
Calibration Available: Certificate of Conformance ( $ Extra )
Color Change: Reversible
Shelf Life: 2 years
  • Instructions
  • Medication storage safety label


We can customize to clients spec.

Scheduled replacement is required every two years.

Compared to a battery replacement exercise this is still easier, than sending someone to replace batteries, which will reset any electronic device and be reprogrammed. This entire process could take 15-30 min ( if all goes well )

Batteries Cost + Personnel Time = $20

The custom Temperature Safety Guide is replaced in less than a minute at 50% less

Ratings & Reviews

No reviews available

Be the first to Write a Review