Black Backing Paint for Liquid Crystals

(0)No Reviews yet
Provided: 25 Gram Bottle
25 Grams per bottle
For Use with TLCSEN510 & TLCSEN511

Special Order: Terms & Conditions Apply.

Notable Features

Black Backing Paint for Liquid Crystals
25 Grams per bottle

Black Backing Paint is to be applied to surface prior to application of sprayable or brush on liquid crystal part number(s) TLCSEN510 and TLCSEN511

Sprayable aqueous coating with good adhesion to most surfaces.

Matte or gloss finishes are achievable by varying the coating thickness.  Easily removed by washing with water.

Weight: .1
Sold As: 25 Gram Bottle
• 25 Grams of Black Backing Paint for Slurries


1.         Spray through airbrush from approximately 6-8" (15-20cm) above substrate surface.

2.         Air brush pressure = 20 psi (approximately).

3.         Drying times at 20-25oC (68-77°F) are approximately 30-40 minutes.  Gently blowing warm air onto the coating can accelerate this.  Avoid letting air cooler than room temperature blow onto freshly sprayed areas.

4.         The depth of coating applied will alter the surface texture of the dried coating.  Thin coats will be matte and slightly rough.  Thicker coats will flow together to a greater extent than thin ones, giving smoother gloss finishes.

5.         The dry coating can be removed by washing with hot, soapy water


  • Black may separate to some extent on standing, and should be mixed thoroughly before use.
  • Store at ambient temperatures, 20-30°C (68-86°F).
  • Can be thinned with water

Ratings & Reviews

No reviews available

Be the first to Write a Review