• Home
  • CMKSEN053: PDT300 Pen Style Thermometer

Comark Most Popular PDT300 Thermometer

(0)No Reviews yet
3 – 9$35.35
10 – 24$33.58
25 – 49$31.82
50 – 74$30.05
75 – 99$29.16
100 +$28.28
Provided: Each
-58°F ~ 300°F ( -50°C ~ 150°C )
Thin Tip Waterproof Pocket Digital Thermometer
5 Year Warranty and NSF Approved


Current Stock: 40

Notable Features

The CMKSEN053 Waterproof Pocket Digital Thermometer with 1.5mm Thin Tip Probe is an ideal pen-style digital cooking thermometer that is slim and fits flat in your pocket.
Type of Sensor: Thermistor
Temperature Sensing Range: -58°F ~ 300°F ( -50°C ~ 150°C )
Temperature Accuracy: +/- 2°F (+/- 1°C) typical
Temperature Resolution: 0.1°
Temperature Scale: °F and °C
Min/Max Memory: Yes
Calibration Available: Field Calibratable
Power: 1.5V Silver Oxide Button Cell Battery
Battery Life: Auto Power Off
Special Notes: Also Available in Purple for
Display: LCD
Sheath Material: Stainless Steel
  • PDT300 Pen Style Thermometer 
  • 1.5V Silver Oxide Button Cell Battery
  • Instructions
  • Expert Technical Support
  • CMKSEN053 Technical Data Sheet (PDT300)
  • Food Safety Brochure
  • 5 Year Warranty and NSF Approved
  • °F/°C switchable
  • Overall length: 5.75"
  • Stem/Probe length: 3"
  • Sampling Time: 1.5 seconds
  • Battery: 1.5V
  • Accuracy: ±1°F ±0.5°C
  • Auto Power Off
  • Water resistant thermometer
  • Membrane keypads
  • Fits flat in pocket
  • Withstands constant use in wet or humid conditions
  • Tapered tip probe for faster response
  • Data hold function to freeze a reading

Press the «ON/OFF» button to start or stop operation.  The unit will automatically power off after 35 minutes.  Low Battery is indicated by «LOB» blinking alternately with a reading.

Change from C° to F°: With the unit “off” hold the «ON/OFF» button and the display will alternate between °F and °C.  Release the «ON/OFF» button when the desired mode is displayed.

Data Hold: To hold a displayed reading, press the «D-H» (data hold) button.  The reading will flash when the D-H is in operation.  Press the «D-H» button again to return to normal operation.

Battery Removal: Use a screwdriver blade or coin to turn the battery cover counter clockwise for removal. Replace the TIPACC300 (1.5V LR44)  battery and turn the cover clockwise until tight.

Ratings & Reviews

No reviews available

Be the first to Write a Review