2 Channel "K" Thermocouple Thermometer

(0)No Reviews yet
1 – 9$212.63
10 – 24$202.00
25 – 49$191.36
50 – 74$180.74
75 – 99$175.41
100 +$170.10
Provided: Each
–58°F ~ +1999°F (–50°C ~ +1230°C)
Includes 9V Battery ( Optional AC/DC Power Supply )
(2) Wire Thermocouples 4 Ft. wire ( max temp 400°F )

Notable Features

Type "K" Thermocouple Thermometer shows two probe readings and the difference between readings: Monitor temperatures using two probes. Dual display simultaneously shows temperature of both probes or temperature of one probe and the difference between probes (T1-T2). With two separate sensors you can note temperature variations in an incubator/oven or temperature gradations in a water bath. Sense changes between inlet and outlet temperatures in any system. Probes indicate temperature changes in less than one second. HOLD switch allows the display to be frozen to capture readings.

Chemical and shock-resistant case: Ideal for quality control, measuring temperatures in wastewater, petroleum products, and biotechnology applications. Rugged case is chemical and shock-resistant ABS plastic.
Type of Sensor: (2) "K" Thermocouple Inputs
Temperature Sensing Range: 58.0 ~ 1999°F (50.0 ~ 1230°C)
Temperature Accuracy: +/- 2°F (+/- 1°C) typical
Temperature Resolution: 0.1°
Temperature Scale: °F and °C
Min/Max Memory: Yes
Dimensions: 3 x 7 x 1-1/4 inches
Weight: 9 ounces
Calibration Available: Yes (included)
Power: 9-volt alkaline battery
  • 2 Channel Thermocouple Thermometer
  • 9V Battery
  • Instructions
  • (2) Wire Thermocouples 4 Ft. wire ( max temp 500°F )
  • Expert Technical Support


1. The DATA RECORD function displays the maximum, and minimum readings. To start the DATA RECORD function, press the “Record Button” (3-6, Fig. 1) once. “REC” will appear on the LCD display.

2. With the “REC” appearing on the display.

3. Push the “CALL Button” (3-7, Fig. 1) once, then the “Max” marker along with the maximum values will appear on the LCD display.

4. Push the “CALL Button” once, then the “Min” marker along with the minimum values will appear on the LCD display.

5. When running the “Record” function, pushing the “Record Button” once again will stop the “Record” function.

6. After stopping the “Record” function, the marker of “REC”, “Max”, “Min” will disappear.

Ratings & Reviews

No reviews available

Be the first to Write a Review