WiFi Temperature & Humidity Data Logger
This EL-WiFi-TH is a low powered battery device. When configured using typical sampling periods (e.g. once every 60 seconds) the sensor will operate for over one year. The battery can then be recharged via a PC or USB +5V wall adapter using the USB lead provided.
The battery is safely charged when the unit is operating between 0 to +40°C (+32 to +104°F). It is protected against charging outside this temperature range. Sensor readings may be inaccurate during battery charging.
The software installed on the PC will allow set-up, data logging and data review. Set-up features will include sensor name, °C/°F, sample rate, and high/low alarms. Once configured, historic data can be viewed via the graphing tool or exported into Excel. This software is available for free from our Support page (link to support/downloads page).
This data logger stands alone by itself on a vertical surface and comes with a wall bracket that can be screwed onto a wall or flat surface. The data logger clips into the bracket.
Requires 802.11b compliant WiFi router/network. Compatible with Enterprise Networks from September 2013
|Type of Sensor:||Thermistor (Internal)|
|Temperature Sensing Range:||-4°F ~ 140°F (-20°C ~ 60°C)|
|Temperature Accuracy:||+/- 2°F (+/- 1°C) typical|
|Temperature Scale:||°F and °C|
|Calibration Available:||Yes (purchased separately)|
|Battery Life:||Rechargeable internal lithium polymer battery|
|Battery Backup:||Yes - Must Purchase Option Power Supply|
|IP Rating:||IP 55|
|Requires Software:||Yes (for initial setup)|
|Transmission Rate:||User Programmable|
- WiFi Temp/Humidity Data Logger
- Software Free Download
- Rechargeable Battery
- 18" USB Programming Cable
- Wall-Mount Clip
- Expert Technical Support