Dual Setback Thermostat with Remote Access
For use exclusively with our SNPALM001 and SNPALM004 temperature alarms, this product allows you to select your desired "home" and "away" temperatures. You can then send a control signal from your alarm to switch between these two settings.
- INPUT TO TOGGLE THERMOSTAT CHANGE: 12V
- NUMBER OF WIRES: 5 (R,C,W,Y,G)
- POWER SUPPLY: 2 AA BATTERIES (NOT INCLUDED)
- COMMON APPLICATION (REFER TO MANUALS FOR VERIFICATION):
- OIL, GAS, PROPANE WITH AIR CONDITIONING
- Part number SNPACC011
- Shipping Weight: 4 lbs
- Batteries: (2) AA Alkaline Batteries (not included)
- Connection: 2 3 4 or 5 wires
- Maximum Load: 1.5 A / 30 VAC per output
- Heat Setting Range: 40°F to 85°F (5°C to 30°C)
- A/C Setting Range: 60°F to 105°F (16°C to 40°C)
- Dual Setback Thermostat
- Instructions
- Expert Technical Support
SNPACC011 INSTRUCTIONS
Selectable temperature control – gives thermostat flexibility to control a range of heating/cooling systems
and applications Automatic changeover between heating and cooling Auto/manual fan control Comfort, economy, and vacation presets – enable temperature changes at the touch of a button Armchair programming – convenient programming by removing faceplate from base Precise LCD – shows room temperature in increments of 0.1ºC or 0.1ºF Low battery indicator – gives 60 days warning to replace batteries Remote input enables change of temperature modes from Sensaphone 400 or 800
alarm/automation system (12 VDC transformer required)
and applications
alarm/automation system (12 VDC transformer required)