Heat-Warn Flashing Light System
Heat-Warn Alarm light has been designed to alert a watch person that the inside temperature is rising or has increased and unfavorable conditions may exist.
The thermostat sensor should be placed at a location that represents the real inside temperature, and away from drafts and sunlight that effect it's sensitivity. Mounting hole allows sensor to be mounted, or you could let it hang from the wire or use Velcro. Tell your security service or watch person about your Heat-Warn light system. It is important that everyone know what the red flashing signal represents. Your immediate attention to check and restore proper room temperature.
| Type of Sensor: | Bi-Metal |
| Temperature Sensing Range: | 50°F ~ 110°F ( 10°C ~ 43°C ) |
| Temperature Accuracy: | +/- 6°F (+/- 3°C) typical |
| Temperature Scale: | °F and °C |
| Sensor Wire Length: | 15 Ft. Cable from light to sensor |
| Min/Max Memory: | No |
| Dimensions: | 5.5" High |
| Weight: | 1.85 lbs |
| Power: | (2) "D" Batteries ( 400 hours flashing ) |
| Battery Life: | 12 months ( depending on activity / 4 weeks on Continuously) |
| Battery Backup: | No |
| IP Rating: | Brightness/Visibility: 5-6cd - over 1,000 ft. |
| Special Notes: | Light stops flashing when temperature rises 10° above dialed-in setpoint |
- Walk-in Coolers ( Food Service )
- Elderly Home Alone
- Greenhouses
- Kennels