RF613 WiFi Temp & Humidity Transmitter
The WiFi Temperature and Humidity Transmitter is a highly accurate solution, designed to monitor the temperature and humidity of your critical ambient storage areas such as office and production areas as well as critical applications, such as clean rooms and warehousing. The transmitter is battery-operated so can be installed virtually anywhere.
The WiFi Temperature and Humidity Transmitter (RF613) can be calibrated (RH Scale only) to remove small humidity offset values, please contact us for more information.
- Battery or Mains Powered
- Integral Temperature & Humidity Sensor
- Connects to your Local WiFi Network
- Designed for Easy Self-Installation
Integral Temperature Sensor Specifications: | |
Sensor Type | Digital Temperature |
Scales | °C / °F and Dew Point |
Temperature Measurement Range | -18°C to +55°C (-0.4°F to +131°F) - See Note 1 |
Accuracy (full range) | <±0.5°C (±0.9°F) |
Temperature Resolution | 0.1° |
Integral Humidity Sensor Specifications: | |
Sensor Type | Digital Humidity |
Scale | %RH |
Measurement Range | 0 to 100% RH |
Accuracy | ±3% RH (10 to 90% RH) |
Humidity Resolution | 0.1% |
Calibration | 5-Point RH Calibration (Optional) |
Common Specifications (All Models Excluding RF612): | |
Hi Hi/Lo Lo Alarm - All Channels excluding Door Switch | Hi Hi and Lo Lo Alarms with Alarm Delay and fully selectable alarms |
Alarm Delay 0-60 minutes - All Channels excluding Door Switch | Delay is programmable for either H H or Hi Hi Alarms or both independently |
Ambient Operating Temperature Range | -18 to +55°C (-0.4°F to 131°F) - 10-90% RH - Non-Condensing - See Note 1 |
Storage Temperature | -18 to +55°C (-0.4°F to 131°F) - See Note 1 |
Wireless Frequency | 2.4GHz WiFi (IEEE 802.11b/g/n) |
Wireless Security | WPA2 Pre-Shared Key - See Note 4 |
Radio Range | Typically, 20 metres indoors |
Clock Accuracy | 20ppm (1 minute/month) at +25°C (+77°F) |
Logging Memory | 140000 Max records - Depends on number of active channels |
Log Rate | Programmable between 1 minute and 60 minutes |
Channel Monitoring Rate | 1 Minute |
Wireless Radio Rate | Programmable between 5 Minutes to 24 Hours - See Note 4 |
Alarm/Active LEDs (Front) | RED - ALARM / GREEN - External Power |
Status LEDs (Side) | RED - WiFi Active / YELLOW - Communications Active / GREEN - Mains Power Connected |
Case Material | Over Moulded food safe clear Polycarbonate with BioCote® Antimicrobial Protection |
Environmental Protection | Case enclosure designed to meet IP65 BS EN 60529 |
Battery Type | 4 x AA Alkaline or Energizer MAX Lithium - See Note 3 |
Battery Life | Up to 1 year |
Dimensions | Length 110mm, Height 100mm, Depth 45mm (Excluding Turret) |
Weight | 300g |
Warranty | 2 Years |
Notes: | |
1 - Temperature and Storage range with Energizer Lithium L91 Cells is expanded to -30 to +60°C (-22°F to +140°F) | |
2 - Other WiFi Security Options will be provided by Firmware Update | |
3 - Use Energizer MAX L91 for improved battery life in all applications but especially recommended for use in low temperature applications | |
4 - The WiFi Rate should be set for 4 hours or greater for best battery life. This will not affect Alarm Notifications |
- RF613 WIFI Temperature Monitor ( Thermistor )
- Battery Powered ( Replaceable )
- Mounting Bracket & Wire Ties
- Instructions
- BioCote® Antimicrobial Protection
- Expert Technical Support
Not Included
- WIFI Monitoring Cloud Service annual subscription ( see CMKACC017)
- Speak with a TIPTEMP Thermal Advisor to Discuss the intended use to achieve your best results
- Let your IT Department know you intend to use WIFI Monitoring equipment on their Network.