2 Channel T/C Thermometer with Built-In Printer

(0)No Reviews yet
$735.53
QuantityPrice
1 – 9$735.53
10 – 24$698.75
25 – 49$661.97
50 – 74$625.20
75 – 99$606.81
100 +$588.42
SKU: COCSEN074
Provided: Each
Range: -328° ~ 2431°F (-200° ~ 1333°C)
  • Programmable intervals from 3 seconds to 23 hours 59 minutes and 59 seconds.
  • Works with Type K J T & E thermocouple probes
  • Fast-response type K beaded wire thermocouple sensors (two supplied)
  • Measures T1 T2 and T1-T2
  • Range is -328.0 to 2431.0°F or -200.0°C to 1333.0°C
  • Resolution is 0.1°F / 0.1°C
  • Accuracy is ±2°F (±1°C)
  • Carrying case is 3-1/2 x 8 x 1-1/4 inches
  • Weight is 10 ounces
  • Display is updated every second
  • Time is displayed to the minute in 24-hour military format
  • Supplied with probe six AAA batteries lithium battery 10-foot paper roll and chemical and shock-resistant carrying case

Notable Features

Printing Thermometer provides permanent record, prints time and date
Provides permanent record of temperature and time of day/date/month. Unit prints the time and date for maximum only, minimum only, average only and in circularly mode T1, T2 and differential. Automatic printing may be programmed to print in any interval from 3 seconds to 23 hours 59 minutes 59 seconds. The perfect dependable and reliable unit to monitor temperature in lab, plant, and field. Fulfills federal requirements for CLIA specification 493.1252.

Hard copy results
Printer provides hard copy for today™s stringent quality-control documentation. Minimum, maximum, and average temperature memories may be displayed or cleared at any time with the touch of a button. Memory feature permits monitoring conditions overnight, on weekends, or for any time period. Alarm may be set in 0.1° increments. Alarm sounds when temperature rises above or falls below set points. Alarm output feature may be used to trigger an external device.

Wide range
Displays temperatures from 328 to 2431°F and 200 to 1333 °C with a resolution of 0.1° and an accuracy of ±1°C from 50 to 982 °C, otherwise ±1.5 °C. Dual probe inputs allow displaying the temperature of probe 1, probe 2, or the difference (delta) of probe 1 and 2. Supplied with two fast-response, Type-K beaded sensors with cable length of 4 feet. Thermometer will accept any Type-J, K, T or E probes. Display is updated every second.

Traceable to NIST for accuracy
To assure accuracy an individually serial-numbered Traceable® Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls (good for approximately 1400 printings per roll), and ABS carrying case. Supplied with paper, carrying case, and six AAA batteries. Accessory adaptor for continuous AC operation is available. Tough ABS plastic case is chemical- and shock-resistant. Unit is 7-1/2 x 3 x 1-1/2 inches. Weight is 10 ounces.

Type of Sensor: Thermocouple
Temperature Sensing Range: -328.0 ~ 2431.0°F (-200.0°C ~ 1333.0°C)
Temperature Accuracy: +/- 2°F (+/- 1°C) typical
Temperature Resolution: 0.1°
Temperature Scale: °F or °C
Dimensions: 3-1/2 x 8 x 1-1/4 inches
Weight: 10 ounces
Calibration Available: Yes (included)
Power: (6) AAA batteries lithium battery
Special Notes: Accepts Type J, K, T, E Thermocouple Sensors
Number of Sensors: TWO
Display: LCD
  • Thermocouple Thermometer Built-In Printer
  • (2) Wire Thermocouples
  • Batteries (6) AAA
  • 10-foot paper roll
  • chemical and shock-resistant carrying case
  • Expert Technical Support
  • Instructions
  • Alarm Output Diagram included with instructions.

Ratings & Reviews

No reviews available

Be the first to Write a Review