🧪 TTI Alarm – Below 15 °C / Above 25 °C
Key Features
✅ Alerts when temperature falls below 15 °C for 60 minutes
✅ Alerts when temperature rises above 25 °C for 60 minutes
✅ Easy-to-read dual LED indicators for clear pass/fail status
✅ Thin, lightweight, and splash-resistant (IP54)
✅ Self-adhesive design attaches directly to product or packaging
✅ Ideal for room-temperature pharmaceuticals, diagnostics, and general shipments
✅ Pre-programmed single-use indicator for simple compliance monitoring
- Designed for products that are shipped and stored at room temperature
- Visible alert if the ambient temperature drops below 15°C for 60 minutes
- Second LED shows an alarm if the ambient temperature rises above 25°C for 60 minutes
Start Delay: 30 Minutes
Temperature Sample Rate: 32 seconds
| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -4º F ~ 140ºF / -20º C ~ 60º C |
| Operating Temperature Range: | -4º F ~ 140ºF / -20º C ~ 60º C |
| Temperature Accuracy: | +/- 1°F (+/- 0.5°C) typical |
| Temperature Scale: | °F and °C |
| Dimensions: | 22.6mm x 42.3mm x 5.6mm ; 6g |
| Calibration Available: | Certificate of Conformance ( $ Extra ) |
| Power: | Non-replaceable Battery |
| Battery Life: | 1 Year |
| Battery Backup: | No |
| IP Rating: | IP54 Dust / Splash Proof |
| Special Notes: | Attach to a product using the self-adhesive backing |
| Adhesive: | Yes |
| Number of Events: | Custom |
| Shelf Life: | 2 Year |
- (100) Pc. Minimum
- TTI Alarm / Singe use
- Flashing Lights Below 15°C / Above 25°C
- Attach to a product using the self-adhesive backing
- Expert Technical Support
How to use
1. To activate, press and hold the button for >3.5 seconds until the green ‘Power on’ LED flashes 3 times.
2. Once the indicator has been activated, the ‘Power on’ LED will flash every 8 seconds.
3. The device starts monitoring temperature after the 30-minute start delay.
4. If no temperature breach has occurred, the green ‘Power on’ LED will flash.
5. When the temperature drops below 15°C for more than 60 minutes single event, the red ‘15°C’ LED will flash.
6. When the temperature exceeds 25°C for more than 60 minutes single event, the red ‘25°C’ LED will flash.
1. To activate, press and hold the button for >3.5 seconds until the green ‘Power on’ LED flashes 3 times.
2. Once the indicator has been activated, the ‘Power on’ LED will flash every 8 seconds.
3. The device starts monitoring temperature after the 30-minute start delay.
4. If no temperature breach has occurred, the green ‘Power on’ LED will flash.
5. When the temperature drops below 15°C for more than 60 minutes single event, the red ‘15°C’ LED will flash.
6. When the temperature exceeds 25°C for more than 60 minutes single event, the red ‘25°C’ LED will flash.