Pre-Programmed Time Temperature Indicator
Single Use Electronic Temperature Monitor.
Battery Powered with two year shelf life
Preset Model Specs
===============
Temperature Breach
10 minutes below -0.5ºC
30 minutes below 2ºC
8 hours cumulative above 8ºC ( 2, 4, 6, 8 Hours LED's )
Start Delay: 30 Minutes
Temperature Sample Rate: 32 seconds
LED alarm
Over 8ºC for 2, 4, 6, 8 hours
Under 2ºC for 30 mins
Under -0.5ºC for 10 m
Battery Powered with two year shelf life
Preset Model Specs
===============
Temperature Breach
10 minutes below -0.5ºC
30 minutes below 2ºC
8 hours cumulative above 8ºC ( 2, 4, 6, 8 Hours LED's )
Start Delay: 30 Minutes
Temperature Sample Rate: 32 seconds
LED alarm
Over 8ºC for 2, 4, 6, 8 hours
Under 2ºC for 30 mins
Under -0.5ºC for 10 m
| Type of Sensor: | Thermistor |
| Temperature Sensing Range: | -4º F ~ 140ºF / -20º C ~ 60º C |
| Operating Temperature Range: | -4º F ~ 140ºF / -20º C ~ 60º C |
| Temperature Accuracy: | +/- 1°F (+/- 0.5°C) typical |
| Temperature Scale: | °F and °C |
| Dimensions: | 22.6mm x 42.3mm x 5.6mm ; 6g |
| Calibration Available: | Certificate of Conformance ( $ Extra ) |
| Power: | Non-replaceable Battery |
| Battery Life: | 1 Year |
| Battery Backup: | No |
| IP Rating: | IP54 Dust / Splash Proof |
| Cumulative Indication Time: | User Programmable |
| Special Notes: | Attach to a product using the self-adhesive backing |
| Adhesive: | Yes |
| Number of Events: | Custom |
| Shelf Life: | 2 Year |
- (50) Pc. Minimum
- TTI Alarm / Singe use
- Flashing Lights Below 2°C / Above 8°C
- Attach to a product using the self-adhesive backing
- Expert Technical Support
- Reacts at three temperatures and five time intervals
- Visible alert if the temperature drops below 2°C
- Second LED shows a further alarm if the temperature drops below -0.5°C
- Row of 3 LEDs alert when the product has been above 8°C for 2,4,6 and 8 hours
How to use
- To activate, press and hold the button for >3.5 seconds until the green ‘Power on’ LED flashes 3 times.
- Once the indicator has been activated, the "Power On" LED will flash every 8 seconds.
- The device starts monitoring temperature after the 30-minute start delay.
- If no temperature breach has occurred, the green ‘Power on’ LED will flash.
- When the temperature drops below 2°C for more than 30 minutes single event the red ’30 minute’ LED will flash. Additionally, falling below -0.5ºC for 10 m will flash the second ALARM LED.
- When the temperature rises above 8°C for more than 8 Hours cumulative, the red ’60 minute’ LED will flash.