Replacement Battery for USB Data Loggers
Replacement Battery 1/2 AA .
Passivation
If left unused for extended periods of time lithium metal batteries naturally form a non-conductive internal layer preventing them from self-discharge and effectively increasing their shelf life. When first installed in the data logger, this may cause a momentary drop in the battery voltage (the Transient Minimum Voltage) as the internal layer is broken down, resulting in the data logger resetting. Inserting the batteries in the data logger and leaving it connected to a PC for about 30 seconds will remove this layer. After this, remove and re-install the batteries to reset the data logger. Overall battery life will not be affected.
Passivation
If left unused for extended periods of time lithium metal batteries naturally form a non-conductive internal layer preventing them from self-discharge and effectively increasing their shelf life. When first installed in the data logger, this may cause a momentary drop in the battery voltage (the Transient Minimum Voltage) as the internal layer is broken down, resulting in the data logger resetting. Inserting the batteries in the data logger and leaving it connected to a PC for about 30 seconds will remove this layer. After this, remove and re-install the batteries to reset the data logger. Overall battery life will not be affected.
| Dimensions: | .550" od x .985" H |
| Weight: | .025 Lbs. |
| Power: | 3.6V |
| Battery Life: | 12-18 Months depending on Sampling Rate |
| Storage Conditions: | Cool Dry Storage |
| Shelf Life: | 3 Years |
- (1) 1/2AA Battery
- Expert Technical Support