Analog Thermometer with Contact Switch
The Temp Alert Temperature Switch Version #2 can be used with all Sensaphone models to monitor air temperature from 0°F to 120°F (-17.8° to 48.9°C) . Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm. The temp alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.
| Type of Sensor: | Bimetallic Coil |
| Temperature Sensing Range: | 0°F to 120°F (-17.8° to 48.9°C) |
| Temperature Accuracy: | +/- 3°F (+/- 1.5°C) typical |
| Dimensions: | 4.5" x 3.25" x 1" |
| Calibration Available: | Yes (purchased separately) |
| Special Notes: | NOTE: Do NOT use in coolers or freezers. Frost build up may cause device to malfunction. |
| Display: | Dial |
| Response Time: | 14 minutes |
- (1) Analog Thermometer with Contact Switch
- Expert Technical Support